28 Jul
2003
28 Jul
'03
8:18 a.m.
Uhm, this may seem too obvious, but I just use the hose connected to the CO2
tank. I take the fitting (to the keg) off and insert into the carboy.
Since I force carbonate a lot, this seems to work well without a lot of extra
effort. I put the carboy on the floor (or whatever position it will receive
the liquid), fill with CO2 (3-5 seconds is good enough for me), and then
syphon away.
Rick seems to have this to a real science. I have not tried keg to keg.
Mark
Mark-
Do you just have a hose that connects to the CO2 tank, with the other end
cut bare, or do you have a fitting that connects the other end to your
carboy?
- Al