13 Aug
2013
13 Aug
'13
1:56 a.m.
Hey guys.
I have no idea how to do this. While we were moving last week with movers
to our new townhome in maple grove. Someone must of hit my mash tun
megapot, but the cover handle came off. I have no clue how to weld
stainless steel to get it back on. Any know how to do it or someone can do
this small job.
Thanks
Erik
13 Aug
13 Aug
4:13 a.m.
Welding stainless requires a special, food-grade process, not cheap. Regular welds can
hold bacteria.
If it's an exterior handle, no problem, get it on however you can...if it isn't,
it's pre boil.
----- Original Message -----
From: "Erik Nelson" <erikn68(a)gmail.com>
To: mba(a)thebarn.com, jab(a)thebarn.com
Sent: Monday, August 12, 2013 8:56:09 PM
Subject: [JAB(a)thebarn.com message] kettle
Hey guys.
I have no idea how to do this. While we were moving last week with movers to our new
townhome in maple grove. Someone must of hit my mash tun megapot, but the cover handle
came off. I have no clue how to weld stainless steel to get it back on. Any know how to do
it or someone can do this small job.
Thanks
Erik
_______________________________________________
JAB mailing list
JAB(a)mail.thebarn.com
http://thebarn.com/mailman/listinfo/jab
1:10 p.m.
New subject: [mba] kettle
<scratches head> Welding stainless isn't really all that special. You do
need the right rod or filler, maybe the right gas if you're using a MIG or
TIG process. The big thing is to make sure that you don't have any
inclusions (aka pockets) where unfriendlies can take up residence. I've
got most of the stuff at home to weld stainless, but not at kettle gauge.
Welding stainless requires a special, food-grade
process, not cheap.
Regular welds can hold bacteria.
If it's an exterior handle, no problem, get it on however you can...if it
isn't, it's pre boil.
----- Original Message -----
From: "Erik Nelson" <erikn68(a)gmail.com>
To: mba(a)thebarn.com, jab(a)thebarn.com
Sent: Monday, August 12, 2013 8:56:09 PM
Subject: [JAB(a)thebarn.com message] kettle
Hey guys.
I have no idea how to do this. While we were moving last week with movers
to our new townhome in maple grove. Someone must of hit my mash tun
megapot, but the cover handle came off. I have no clue how to weld
stainless steel to get it back on. Any know how to do it or someone can do
this small job.
Thanks
Erik
_______________________________________________
JAB mailing list
JAB(a)mail.thebarn.com
http://thebarn.com/mailman/listinfo/jab
_______________________________________________
mba mailing list
mba(a)thebarn.com
http://www.thebarn.com/mailman/listinfo/mba
2:01 p.m.
New subject: [mba] kettle
Enter the pro....I love it!
----- Original Message -----
From: "Jeff Kalchik" <jkalchik(a)mchsi.com>
To: TROETS(a)comcast.net
Cc: "Erik Nelson" <erikn68(a)gmail.com>, mba(a)thebarn.com, jab(a)thebarn.com
Sent: Tuesday, August 13, 2013 8:10:20 AM
Subject: Re: [mba] [JAB(a)thebarn.com message] kettle
<scratches head> Welding stainless isn't really all that special. You do
need the right rod or filler, maybe the right gas if you're using a MIG or
TIG process. The big thing is to make sure that you don't have any
inclusions (aka pockets) where unfriendlies can take up residence. I've
got most of the stuff at home to weld stainless, but not at kettle gauge.
Welding stainless requires a special, food-grade
process, not cheap.
Regular welds can hold bacteria.
If it's an exterior handle, no problem, get it on however you can...if it
isn't, it's pre boil.
----- Original Message -----
From: "Erik Nelson" <erikn68(a)gmail.com>
To: mba(a)thebarn.com, jab(a)thebarn.com
Sent: Monday, August 12, 2013 8:56:09 PM
Subject: [JAB(a)thebarn.com message] kettle
Hey guys.
I have no idea how to do this. While we were moving last week with movers
to our new townhome in maple grove. Someone must of hit my mash tun
megapot, but the cover handle came off. I have no clue how to weld
stainless steel to get it back on. Any know how to do it or someone can do
this small job.
Thanks
Erik
_______________________________________________
JAB mailing list
JAB(a)mail.thebarn.com
http://thebarn.com/mailman/listinfo/jab
_______________________________________________
mba mailing list
mba(a)thebarn.com
http://www.thebarn.com/mailman/listinfo/mba
2:50 p.m.
New subject: [mba] kettle
No, not really a pro, I know enough to be dangerous.
Something else just crossed my mind. The cover handle may just be
spot-welded. If that's the case, a good autobody shop may be able to weld
it back on.
My brother recently retired as as senior food engineer from Kellogg's, he
worked in their pilot plant bringing new food processes into production.
We've spent a little time talking about how to build equipment with
sanitation in mind. One of these days, I'll get around to start welding
up the 60' of 2"x2" stainless tubing I have in the garage into an
all-stainless brew sculpture (no paint required. Ever.)
Jeff
Enter the pro....I love it!
----- Original Message -----
From: "Jeff Kalchik" <jkalchik(a)mchsi.com>
To: TROETS(a)comcast.net
Cc: "Erik Nelson" <erikn68(a)gmail.com>, mba(a)thebarn.com, jab(a)thebarn.com
Sent: Tuesday, August 13, 2013 8:10:20 AM
Subject: Re: [mba] [JAB(a)thebarn.com message] kettle
<scratches head> Welding stainless isn't really all that special. You do
need the right rod or filler, maybe the right gas if you're using a MIG or
TIG process. The big thing is to make sure that you don't have any
inclusions (aka pockets) where unfriendlies can take up residence. I've
got most of the stuff at home to weld stainless, but not at kettle gauge.
Welding stainless requires a special, food-grade
process, not cheap.
Regular welds can hold bacteria.
If it's an exterior handle, no problem, get it on however you can...if
it
isn't, it's pre boil.
----- Original Message -----
From: "Erik Nelson" <erikn68(a)gmail.com>
To: mba(a)thebarn.com, jab(a)thebarn.com
Sent: Monday, August 12, 2013 8:56:09 PM
Subject: [JAB(a)thebarn.com message] kettle
Hey guys.
I have no idea how to do this. While we were moving last week with
movers
to our new townhome in maple grove. Someone must of hit my mash tun
megapot, but the cover handle came off. I have no clue how to weld
stainless steel to get it back on. Any know how to do it or someone can
do
this small job.
Thanks
Erik
_______________________________________________
JAB mailing list
JAB(a)mail.thebarn.com
http://thebarn.com/mailman/listinfo/jab
_______________________________________________
mba mailing list
mba(a)thebarn.com
http://www.thebarn.com/mailman/listinfo/mba
_______________________________________________
mba mailing list
mba(a)thebarn.com
http://www.thebarn.com/mailman/listinfo/mba
2:58 p.m.
New subject: [mba] kettle
It is on the exterior of the cover. Nothing to worry about sanitizing.
On Tue, Aug 13, 2013 at 9:50 AM, Jeff Kalchik <jkalchik(a)hushmail.com> wrote:
No, not really a pro, I know enough to be dangerous.
Something else just crossed my mind. The cover handle may just be
spot-welded. If that's the case, a good autobody shop may be able to weld
it back on.
My brother recently retired as as senior food engineer from Kellogg's, he
worked in their pilot plant bringing new food processes into production.
We've spent a little time talking about how to build equipment with
sanitation in mind. One of these days, I'll get around to start welding
up the 60' of 2"x2" stainless tubing I have in the garage into an
all-stainless brew sculpture (no paint required. Ever.)
Jeff
Enter the pro....I love it!
----- Original Message -----
From: "Jeff Kalchik" <jkalchik(a)mchsi.com>
To: TROETS(a)comcast.net
Cc: "Erik Nelson" <erikn68(a)gmail.com>, mba(a)thebarn.com, jab(a)thebarn.com
Sent: Tuesday, August 13, 2013 8:10:20 AM
Subject: Re: [mba] [JAB(a)thebarn.com message] kettle
<scratches head> Welding stainless isn't really all that special. You do
need the right rod or filler, maybe the right gas if you're using a MIG
or
TIG process. The big thing is to make sure that
you don't have any
inclusions (aka pockets) where unfriendlies can take up residence. I've
got most of the stuff at home to weld stainless, but not at kettle gauge.
_______________________________________________
mba mailing list
mba(a)thebarn.com
http://www.thebarn.com/mailman/listinfo/mba
Welding stainless requires a special, food-grade
process, not cheap.
Regular welds can hold bacteria.
If it's an exterior handle, no problem, get it on however you can...if
it
isn't, it's pre boil.
----- Original Message -----
From: "Erik Nelson" <erikn68(a)gmail.com>
To: mba(a)thebarn.com, jab(a)thebarn.com
Sent: Monday, August 12, 2013 8:56:09 PM
Subject: [JAB(a)thebarn.com message] kettle
Hey guys.
I have no idea how to do this. While we were moving last week with
movers
to our new townhome in maple grove. Someone must of hit my mash tun
megapot, but the cover handle came off. I have no clue how to weld
stainless steel to get it back on. Any know how to do it or someone can
do
this small job.
Thanks
Erik
_______________________________________________
JAB mailing list
JAB(a)mail.thebarn.com
http://thebarn.com/mailman/listinfo/jab
_______________________________________________
mba mailing list
mba(a)thebarn.com
http://www.thebarn.com/mailman/listinfo/mba
_______________________________________________
mba mailing list
mba(a)thebarn.com
http://www.thebarn.com/mailman/listinfo/mba
4498
days inactive
4498
days old
5 comments
4 participants
participants (4)
-
Erik Nelson -
Jeff Kalchik -
Jeff Kalchik -
TROETS＠comcast.net